All IKARUS-Interfaces and Adapters at a glance

All simulators are supplied either with an original IKARUS USB Interface cable or an original IKARUS USB GameCommander. There are different versions of the Interface cable. Here you can see the different variants.They differ both in appearance and in function. Depending on your transmitter; additional adapters may be required.

Actual Interfaces:

1.1) USB interface #3031037

This set consists of the USB-IKARUS interface and the matching adapter for 3.5 mm mono jacks (e.g. Spektrum).
It is suitable for the wired connection of an RC remote control to the aeroflyRC.
1.2) USB interface #3031035

This set consists of the interface #3031010 and the matching Futaba adapter.
It is suitable for the wired connection of an RC remote control to all versions of the aeroflyRC.

 

3031020_ueberblick
1.3) USB-Interface #3031020

  Using the  IKARUS USB Interface #3031020 you can connect a receiver (e.g. HoTT) with analog sumsignal to a Windows or Mac computer as a “joystick”. For a better distinction the USB interface # 3031010 is delivered in a dark red housing.
3031100_ueberblick
1.4) RC SimConnector #3031100
  Usinf the RC SimConnector #3031100 you can connect any receiver with digital sum signal to your Windows- r Mac-Computern as a “Joystick” (This interface is usable for Futaba-SBus, MPX-SRXL or Spektrum-Satellit)

  These former interfaces are no longer sold:

 

3031010_ueberblick
A1) USB-Interface #3031010

Using the  IKARUS USB Interface #3031010 you can connect your own radio to a Windows or Mac computer as a “joystick”. Since aeroflyRC7 the IKARUS USB interface is not longer needed to launch the software. For a better distinction the USB interface # 3031010 is delivered in a dark red housing.

 

A2) USB-Interface for aerofly5:
There are three versions of interface cable illustrated below.

Current: USB-Interface stick Interface cable version 1 Interface cable version 2
alt alt alt

  These interface cable can be used for aerofly professional Deluxe and for aerofly5

A3) USB-2-player cable:
There are three versions illustrated below:

Current: USB stick USB Interface cable yellow   USB Interface cable red  
alt alt alt

These interface cables can only be used in conjunction with a USB GameCommander or a grey USB Interface cable (both version 1 and version 2) or a black USB stick.  

A4) USB-Interface cable easyFly:
There are two versions of Interface cable illustrated below.

Current: easyFly4 USB stick easyFly3 USB Interface cable
alt alt

The easyFly interface cable can be used both for the easyFly2 and for the easyFly3.

Adapter:
If you use a version with USB interface cable, you may need a special adapter depending on your transmitter. Adapter order No.: #31036 This adapter is required for all RC-Radios with a 3.5 mm mono jack. You also can use this adapter for all Futaba radios with the 6-pin “cube connector”  

alt Adapter Best. Nr.: 31037 This adapter is required for the following transmitters: Walkera:  WK-2401 (2.4 GHz Lama) with 4-pin Mini DIN  

  Adapter Best. Nr.: 31047 This adapter is required for the following transmitters: Multiplex:   mc-3010; mc-3030 Futaba:  FC-28, robbe:  Mars Rex, Terra Top

 

Comments are closed.