How can I check/improve the performance on my PC

If aeroflyRC isn’t running smoothly on your Windows PC, you can adjust the following settings to improve performance:

Note: All of the points mentioned here only apply to graphics cards that meet the minimum requirements for a Vulcan-compatible 3D graphics card with 2 GB of RAM.

Please first enable the frame rate (FPS) display via the blue main menu and Settings -> Graphics -> Show FPS. The frame rate should be above 30 frames per second.

If your PC doesn’t reach this value, please try these settings:

Set aeroflyRC to windowed mode under Graphics -> Resolution and resize the window to the monitor size. Windowed mode requires significantly less graphics performance than full-screen mode.

Disable the full-screen mode under Settings -> Graphics -> Display FPS. Visual aids: all additional displays such as wind arrows.

  • In 4D scenes, set the cloud display to a minimum.
  • In 4D scenes, do not fly too close to the ground in follow mode.
  • General tip: Always ensure adequate cooling of the graphics card, especially if you’re using a laptop. Experience has shown that dusty or blocked fans can also cause excessively high internal temperatures and frame drops.

    Comments are closed.